Clutch-Brake-Variety

Contact Us 630-289-8000

Celebrating 15 Years!

Motion_Works_Logo

Manufactures Representatives / Distributors / Engineers

HPS Series

Brake Pads

Standard Pad

MW # SPI # TMC # # C.O.F.* Color
Material/Notes

1011 L100 1011 0.1 Grey Red Edge
Carbon base with various phenolic fillers and bonding agents. General use. Low friction, low torque. May glaze at high temps and low operating pressures. Unstable above 350F.


1011G L100G 1011 S22000074 0.1 Grey Red Edge
Carbon base with various phenolic fillers and bonding agents. L100 with grooves. General use. Low friction, low torque. May glaze at high temps and low operating pressures. Unstable above 350F.


1011 L102 1001 S22000036 0.1 Solid Red
Teflon w/fiberglass, fillers and bonding agents. High speed, low temps, low torque. Stable COF at low temps. Unstable above 200F. COF lower at slow speeds. Very quiet.


3011 M200 3011 S22000066 0.3 Grey Green Edge
Carbon base with various phenolic fillers and bonding agents. General use. Low cost, med friction, med torque. May glaze at high temp, low pressure. Unstable above 350F. High propensity to make noise.


3011G M200G 3011G 0.3 Grey Green Edge
Carbon base with various phenolic fillers and bonding agents. M200 with grooves. General use. Low cost, med friction, med torque. May glaze at high temp, low pressure. Unstable above 350F. High propensity to make noise.


3012 M201 3012 0.3 Grey Yellow Edge
Carbon base with various phenolic fillers and bonding agents. General use. Low-cost, med-friction, med torque. May glaze at high temps/low pressures. Unstable above 350F. One of the best pads for noise problems. May not be sufficient when changing from 3011 due to lower overall coefficient. 

3012G M201G 3012G S22000065 0.3 Grey Yellow Edge
Carbon base with various phenolic fillers and bonding agents. M201 with grooves.General use. Low-cost, med-friction, med torque. May glaze at high temps/low pressures. Unstable above 350F. One of the best pads for noise problems. May not be sufficient when changing from 3011 due to lower overall coefficient. 

3012G/T M201G/T 3012GT 0.3 Grey Yellow Edge
Carbon base with various phenolic fillers and bonding agents. M201 with grooves and anti-squeal noise reduction. General use. Low-cost, med-friction, med torque. May glaze at high temps/low pressures. Unstable above 350F. One of the best pads for noise problems. May not be sufficient when changing from 3011 due to lower overall coefficient.

4011 H300 4011 0.4 Grey Blue Edge
Carbon base with kevlar, phenolic fillers, and bonding agents. General use. Longer pad life typical. Stable COF at elevated temps. May glaze at high temp, low pressure, low speed. High propensity for noise.

4011G H300G 4011G S22000047 0.4 Grey Blue Edge
Carbon base with kevlar, phenolic fillers, and bonding agents. H300 with grooves. Longer pad life typical. Stable COF at elevated temps. May glaze at high temp, low pressure, low speed. High propensity for noise. 

4512 H302 4512 S22000070 0.45 Grey Fuzzy Edges
Carbon base with various phenolic fillers and bonding agents. Standard material for most applications. Low cost. One of the best pads for noise problems. Items produced before Jan 1988 have orange edge.


4512G H302G 4512G 0.45 Grey Fuzzy Edges
Carbon base with various phenolic fillers and bonding agents. H302 with grooves. Standard material for most applications. Low cost. One of the best pads for noise problems. Items produced before Jan 1988 have orange edge.


4512G/T H302G/T 4512GT 0.45 Grey Fuzzy Edges
Carbon base with various phenolic fillers and bonding agents. H302 with grooves and anti-squeal noise reduction. Standard material for most applications. Low cost. One of the best pads for noise problems. Items produced before Jan 1988 have orange edge.


4512TEF H302TEF 4512TEF 0.45 Grey Fuzzy Edges
Carbon base with various phenolic fillers and bonding agents. H302 with grooves with TFE anti-squeal strips. Standard material for most applications. Low cost. One of the best pads for noise problems. Items produced before Jan 1988 have orange edge.

4514 H306 4514 S22000051 0.45 Grey White Flecks
Carbon base with various phenolic fillers and bonding agents. High torque, low temp. COF fades above 250F. Wears faster but may be suitable for some noise problems.

4514G H306 4514G 0.45 Grey White Flecks
Carbon base with various phenolic fillers and bonding agents. High torque, low temp. COF fades above 250F. Wears faster but may be suitable for some noise problems.

TBF95-7 H315G TBF95-7 S22000077 0.45 Grey
Carbon base with various phenolic fillers and bonding agents. Stable COF at most temps and pressures. Moderate-high propensity for noise.

4520 H320G 4520 S22000095 0.45
GRV pad grooved.

4512G/T H320G/T 4520 S17000010 0.45
Pad grooved Anti-Squeal

* Coefficient Of Friction (C.O.F.) rating is approximate and may vary with changes in environmental conditions. It is not recommended that this number be used as an absolute value in computing torque or tension in open-loop systems. Montalvo logo used by permission.

There are 4 categories:

There are 4 categories:

You are viewing the text version of this site.

To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.

Need help? check the requirements page.


Get Flash Player